

.png)
- Unión Rotativa E75 RS Trabaja en Seco.Contiene sellos de Carburo de silicio y grafito. Protección para los rodamientos por desengrase.Rodamientos son precargados para evitar la vibración.

- Posicionador TZIDC Type 5400. Posicionadores DVC se caracterizan por su fácil montaje y adaptación

- Trampa Flotador Libre
- modelo NFT250 Procedencia Estados Unidos Máxima Presión 250 psi Máxima Temperatura 232°C
CONDENSATE COMMANDER CLASSIC PUMP
SPECIFICATION
Pump shall be a pressure vessel drainer operated by steam,
compressed air or other pressurized gas to 200 psig. Body shall be
fabricated steel ASME code to 200 psi. Pump mechanism shall be all
stainless steel without external packing or seals. Mechanism shall
employ one spring operating in continuous compression. Spring shall
be warrantied for the life of the unit. When required, unit shall be
equipped with an external cycle counter, sight glass and insulating
jacket.
MAXIMUM OPERATING CONDITIONS
PMO: Max. Operating Pressure 200 psig (13.8 barg)
TMO: Max. Operating Temperature 400°F (204°C)
PMA: Max. Allowable Pressure 200 psig (13.8 barg)
TMA: Max. Allowable Temperature 400°F (204°C)
With optional Temperature/Pressure upgrades:
PMO: Max. Operating Pressure 250 psig (17.2 barg)
TMO: Max. Operating Temperature 650°F (343°C)
PMA: Max. Allowable Pressure 250 psig (17.2 barg)
TMA: Max. Allowable Temperature 650°F (343°C)
MATERIALS OF CONSTRUCTION
Tank Weldment: Steel
Trip Mechanism w/Flange: DI/Stl/SS
Gasket: Graphite
Bolt, Hex Head: Steel
Eye Bolt: Steel
Nut: Steel
Nameplate: Aluminum
Drive Screw: Steel
Pipe Plug, 1/2" NPT: Steel
Water Level Gage: Bronze
Inlet Reducer: M. Iron
Inlet Nipple: Steel
Inlet Check Valve: Bronze/Stainless Steel
Outlet Reducer: M. Iron
Outlet Nipple: Steel
Outlet Check Valve: Bronze/Stainless Steel
OPERATING CHARACTERISTICS
Pump Discharge per Cycle: 7.8 - 8.6 Gal
Max. Instantaneous Discharge Rate: 90 GPM (w/2" outlet check)
Steam Consumption: ~3 lbs per 1000 lbs. of liquid pumped
Air Consumption: ~100 SCF per 1000 lbs. of liquid pumped
Recommended Filling Head: 12"
Canadian Registration # 1352.9C